Forsiden > BÅTDELER & UTSTYR > Brytere > MPS Gas-Cap-Powerswitch Futaba

Klikk for større bilde

MPS Gas-Cap-Powerswitch Futaba

  • Utsolgt - Under bestilling!
  • Kr 360,00


    MPS Gas-Cap-Powerswitch - Product description

    • Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
    • The show stopper: turning On/Off is done with external magnet
    • An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
    • The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
    • The operating system is indicated by a bright shining blue ring
    • Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
    • The perfect switch - no ugly holes in the fuselage!
    • Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
    • Continuous current 5A, peak current 20A
    • Version including Robbe/Futaba connector (input and output)
    • Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
    • High grade gold plated contacts (FCI)
    • Mounting diameter: 15.5 mm, installation depth about 35mm

    ATTENTION: The switching off process of MPS works with a hall effect sensor. Hall effect sensors can be influenced by magnet fields. It is possible that the MPS switches off temporarily when exposed to a very strong magent field (i.g. electric drive). Current-carrying cables generate a magnet field. So please run all cables which are carrying a high current (>100A) with a distance of at least 3cm (1.18in) from the switch acutator.

    Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions.