Beskrivelse

Outboard leg – Scaled with motor and black cover + stickers

Comes with 36mm x 60mm 2070kv water cooled brushless motor suitable for 3-6s. Prop to be suited dependent on the voltage you choose to use. 113mm from transom mount to rear and 150mm deep from top of the cover to propeller drive. 30mm fin and 4mm stub.

Specifications – Motor Version:

• TFL SSS 3660 with 4mm male connectors.
• Motor dia: 36mm
• Motor length: 60mm
• 2075Kv with 5mm Shaft
• Installed metal water jacket
• 185mm from bottom of skeg to top of outboard cover – cover is 55mm wide
• Weigt: 550 g (approx)
• Drive: 4mm Propeller shaft (use propeller for drive dog)
• Upper limit for prop: 48mm
• Gear driven

What do you need:
You need everything except the outboard drive unit. We suggest an ESC at 150 amp and think 4 cells lipo should be sufficient.
You need to choose propeller based on the application (voltage) you plan to use.
Bullets for motor connection – 4mm

We think and recommend that you use this drive for boats from 750mm to 1000mm. If you choose to change the motor, we suggest that you use motors with diameter 36mm and not longer than 60mm. If you moves above this, it might damage the gears and other parts.

4