Forsiden > Motorer - Bil (& Combo) - Elektro > Combo's (Motor + ESC) > Team Powers - Combo for M-Chassis

Klikk for større bilde

Team Powers - Combo for M-Chassis

  • På lager
  • Kr 999,00


    Team Powers - Combo for M-Chassis

    Motor: Team Powers Cup Racer Brushless Motor(Sensor) - 13.5T

    • Design Specification: Based on IFMAR/ROAR/EFRA/BRCA
    • Motor Dimensions (Diameter x Length)  35.8mm x 51mm 
    • Shaft Diameter: 3.17mm
    • Magnet Dimensions (Diameter x Length):  12.45mm x 24mm (6.5turn - 9.5turn), 12.3mm x 24mm (10.5turn - 21.5turn)
    • Fix endbell with advanced timing is included
    • Weight: -168g  
    • Recommended RC Model Car: M-Chassis
    • Turns: 13.5T

    ESC - Speedcontrol:


    • Hardware design is same as Radon V2.0 series speed control except using plastic casing.
    • Ultra-smooth, Precise Throttle and Braking Control
    • Compatible with Sensored/Sensorless Brushless Motors
    • Data Analysis Capability (RPM, Low voltage and ESC temperature)
    • HotWire PC Interface for Advanced Programming and Updating
    • Easily Programming through the LED card(included in the package)
    • Built-in one touch On/Off switch with LED
    • Bulit-in Low voltage cut-off, Overheat protection and signal loss protection
    •  Firmware, PC Software & LCD program card is compatible with Radon V2.0 series speed control


    • Controls: Forward/Brake/Reverse
    • Input Voltage: 2S-3S lipo
    • Motor Limit: 9.5T or over
    • Max current: 45A per phase
    • Size: 41x31x20mm
    • Weight: 42g
    • BEC: 6V/3A

    NB! If you experience that the motor runs faster in reverse, this ESC is programmed with Blinky just for forward. This is done from the fabric to save storage on the esc. The way you reduces the reverse speed is to adjust on your radio. We have got this information from Team Powers and we do our best to solve the issue.

    So, there is nothing wrong with the ESC. It's in blinky as it should for forward driving.

    When running the ESC in blinky mode (0 in timing), you will experience that the motor slightly will be faster in reverse. The reason is that the motor is set on -2 degree timing. This is to secure the reliability.