Forsiden > ESC & UTSTYR - BIL > ESC (Electronic Speed Controls) - BIL > G-Force - TS120 R2 - Brushless ESC

Klikk for større bilde

G-Force - TS120 R2 - Brushless ESC

  • På lager
  • Kr 1 099,00


     - G-Force - TS120 R2 - Brushless ESC

    G-Force have introduced the new TS 120A R2 brushless speed controller. Based off of the TS 120A the R2 sports a redesigned case with a more complex heatsink design while internal updates make for a more linear throttle response and improved braking performance and feeling.

    The 120A rated controller is usable with motors down to 3.5T, it is 3S LiPo compatible and features a 6V/3A BEC system. GForce’s optional Progbox, PC Link or WiFi devices allow for a wide range of adjustments of the ESC that comes with a 12AWG black-colour wire set, high airflow fan and capacitor unit.

    More linear throttle response and improved braking performance and feeling! 


    • Constant/Peak current: 120A/760A
    • Motor type: Sensored/sensorless brushless
    • Motor limit 2S: 3.5T on-road, 5.5T off-road
    • Motor limit 3S: 5.5T on-road, 8.5T off-road
    • Voltage input: 2-3S LiPo, 4.8V-10.8V NiXX
    • BEC system: 6V/3A
    • Dimensions: 39 x 38 x 20mm
    • Weight: 45g w/o fan and wires 





    • 12AWG cable (1m)
    • Coolinf Fan(8V 0.2A 20000RPM)
    • Large-capacity capacitor
    • Instruction manual 

    Product Specification

    Constant/Burst Current 120A/760A 
    Motor Compatible Brushless Sensor & Sensorless ESC
    Car Compatible 1/10,1/12 all competitions
    1/10 and 1/8 Crawlers
    Motor Limits 4-6S NIMH or 2S LIPO--≥3.5T(1/10 on-road), ≥5.5T(1/10 off-road)
    7-9S NIMH or 3S LIPO--≥5.5T(1/10 on-road),≥8.5T(1/10 off-road)
    Resistansce  0.0003 ohm
    Battery Cell Count 4-9S NIMH or 2-3S LIPO
    BEC Output 6V@3A , linear
    Size  39x38x20mm (LxWxH) 

    45g(w/o wire)

    FAN 8V@0.2A , MAX 12.6V 
    Direction of a Throttle "Forward/Brake" "Forward/Reverse" "Forward/Brake/Reverse"
    The shipment state becomes "Forward/Brake".
    Optional Program Box G0017 is needed for changing a setup.